2023 MAKE A SPLASH! GRANT CONTEST NEED-BASED WINNER INSTALLATION: John Anderson Park

In 2023, we hosted our fourth annual Make a SPLASH! Grant Contest to award two deserving organizations in the United States an all-expenses-paid splash pad surface. One award was for a facility that exemplified inclusive design principles and the other was need-based for a deserving community that met specific benchmark criteria.

We received an incredible number of thoughtful applications and out of so many deserving entries, one of the entries we received stood out.

Today, we’re proud to showcase the Need-Based Award winner’s installation: John Anderson Park Splash Pad in Grandview, Missouri.

When asked what winning this grant would mean to their community, Jared Elbert said,

“This would mean so much to the community. Grandview, MO, part of the Kansas City Metropolitan Area, is a minority majority community with a population of nearly 27,000. This is a very strong, tight knit community that is growing but also one with challenges. The median income of Grandview is $48,000/year which means free amenities such as splash pads and playgrounds are of upmost importance. John Anderson park and its splash pad are crucial to youths access to free and safe recreation opportunities.

It can be challenging to maintain the original excitement of a 14 year old splash park. In winning this grant it would allow the community to enhance safety, aesthetics, and bring excitement back to Grandview’s only free splash park. It would increase the quality of life for residents, mean the world to the neighborhoods within walking distance, as well as the community and visitors. ”

— Jared Elbert, Parks & Recreation Director

Before: Broom Finish Stained Concrete

After: Life Floor

“ It would significantly upgrade the safety of the site for guest by switching from concrete to the safer Life Floor, while also reducing liability concerns from a staff perspective. Guests will have a greater piece of mind when allowing their children to utilize the splash park and socialize. It would enhance the beautification and experience by bringing eye catching color and patterns to the park. ”

— Jared Elbert, Parks & Recreation Director

Existing Waterplay spray features from their High Seas Collection laid the groundwork for this immersive experience complete with a sailing ship, whale tail, and palm tree. Four sound sprays are interspersed throughout the amenity where children can activate and listen to different sounds including a whale, dolphin, penguin and seagull. Dynamic ground sprays encourage motion throughout the entire area and our tiles now weave between their features with a treasure hunt surface game designed to excite and inspire imagination.

Our 2023 entrants chose from 6 pre-designed themes that would be tailored to fit their project scope. The city of Grandview chose the Treasure Hunt option which features a bright triangle gradient Pattern in a custom color palette of Bluebird, Turquoise, Seafoam, and Mojave. A mix of Sea Life, Marine, and Treasure Hunt Inlays can be seen across the splash pad in both neutral and complementing colors.

Designed and Copyrighted by Life Floor Studio.

We can’t wait to hear the stories of how this project will continue to uplift and transform the way families play at John Anderson Park in Grandview, Missouri. Thank you to the city of Grandview for entering our contest and for trusting us to surface your community’s splash pad!

Keep an eye out for our project showcase highlighting our Inclusive Design Award winner coming soon!

---

About the Make a SPLASH! Grant Contest

The Make a SPLASH! Grant Contest is one of our team’s favorite annual events. We love giving back to our communities across the United States and seeing the difference our surfaces make. Through this grant contest, our goal is to uplift communities across the country each year with beautiful and accessible splash pad surfaces that enhance positive memories for years to come.

---

THE 5TH ANNUAL MAKE A SPLASH! GRANT CONTEST IS
OPEN FOR ENTRIES

Don’t miss these two opportunities to win free Life Floor surfacing for your splash pad!

Introducing a New Standard for Pool Perimeter Surfaces

In 2024, NSF International published a new section within NSF/ANSI/CAN Standard 50 for surfaces around pool deck perimeters. This section details the criteria that surfacing products meet in order to become certified. Most notably, the standard recommends that pool perimeters should be slip-resistant to increase safety at aquatic facilities.

At Life Floor, we’re enthusiastically embracing this addition to NSF/ANSI/CAN Standard 50 and we’re proud to share that our Ripple texture is certified to this set of criteria for pool perimeter surfaces. From competitive swim schools to therapy pools, this standard brings positive change to our industry and we’re excited to further our mission of making all aquatic spaces safe and beautiful for all people through this opportunity.

The pool perimeter standard is similar to the version in NSF/ANSI/CAN 50 for splash pads, but the primary differences are that this variation does not require surfaces to be cushioned and the testing criteria only applies to non-concrete surfacing materials.

As part of the certification process for pool perimeter surfaces, our tiles are third-party tested to demonstrate high quality safety in real-world applications. They also show aquatic durability necessary for pool amenities. The 5 criteria include:

• Slip-Resistance

• Impermeability

• Cleanability

• UV Resistance

• Chemical Resistance

Life Floor is certified to the standard and meets or exceeds all 5 requirements.

---

If you would like to learn more about Life Floor’s products, please contact us to see if Life Floor would be a good fit for your venue.

Custom Aquatic Theming at Wet'n'Wild Gold Coast, Australia

Wet'n'Wild Gold Coast in Australia chose Life Floor for their H2Oasis splash pad. This unique 8-color design was created by Burling Brown Architects located in Queensland.

This installation features a unique custom-cut design highlighted with Porcelain Life Floor tiles weaving through the main colors. These Porcelain lines create organic shapes with contrasting color blocks and allow for subtle paths of engagement through spray fixtures.

Guest experience is important for an aquatic amenity such as H2Oasis. Choosing colors for the surface that complement the surrounding environment allows for immersive theming and lends to a guest’s overall impression of their visit.

---

Thank you to Grant Burgess, Managing Director for Life Floor Australia and New Zealand, for his creative collaboration with Burling Brown Architects and his strategic partnership with Grassports Australia installers. Their vision for executing this project successfully with excellence resulted in innovative new installation tactics that can be applied to future projects in Australia.

Is Concrete Surfacing the Right Choice for Splash Pads?

Using concrete as the surface for an aquatic play area is like building a house, putting down plywood and calling it a home. Sure, it functions, but it’s not going to be comfortable or add any design value. And that’s the reality of concrete. It functions fine as a foundation, but is that all we want out of surfacing?

Life Floor Activates the Entire Splash Pad

At Life Floor, we believe safety surfacing dramatically improves the user experience. It completes the immersive experience you’ve planned and budgeted for, combining safety, playfulness, and utility all in one. In fact, because of the way Life Floor performs with water, it’s actually an additional play feature that activates the entire splash pad.

The Surface is a Canvas for Play

Life Floor is a feature because it encourages different kinds of play. The entire splash zone is energized when Life Floor is the surface. Kids cartwheel, jump, somersault, crawl, and tumble their way through spray features. In other words, users play in more ways with Life Floor. By equipping the surface for play, designers can engage 90% more of the aquatic facility.

Investing in Safety and Play Value

The added safety and play benefits of Life Floor are a worthwhile investment. Explore some of the ways we’ve transformed facilities and see what our customers have to say about Life Floor.

Historically, aquatic surfacing has been disastrous. Everything has failed. But with Life Floor, that’s all changed. You can now specify durable surfacing that doubles as a feature. Life Floor's performance and durability have been third-party tested through NSF, which is why we can confidently say we are the only aquatic safety surface that does exactly what it should do.

Want to learn about how our tiles are third-party tested for durability?
Read about how we met the criteria for NSF Standard 50:26 here.

---

HAVE A PROJECT THAT NEEDS LIFE FLOOR?

Contact us below and tell us about your project. Our Studio Team provides custom design concepts free of charge. We look forward to designing with you soon!

ALL ABOARD! CRUISES FILLED WITH AQUATIC FUN

Guest experience is essential aboard any cruise ship to ensure a fun and unique vacation for passengers. Among the numerous amenities available, water features have become increasingly popular attractions. Flowriders by WhiteWater Industries, waterslides, splash pads, and beautiful pools have become staples for many vessels. As a result, patrons have come to expect bigger and brighter aquatic experiences as new vessels are built. 

LARGE AQUATIC PLAY STRUCTURES

Elevated structures such as multi-level interactive water play structures or waterslide towers create an immediate presence that cruisers are often amazed by. These types of amenities serve as a focal point for the ship as a whole and create lasting memories.

Surf machines such as Flowrider by WhiteWater Industries are compact attractions, but they have a large onboard impact. For many guests, exposure to surf machines like these might happen for the first time on a cruise. Some ships have chosen to reinforce branding alongside the surrounding walkways and reduce risk with Life Floor’s custom logos and safety surfacing benefits.

View fullsize

POOL DECKS

Pool decks are popular amenities on cruise ships. Having a comfortable pool deck where guests feel at ease improves guest experience at these amenity types. Because these features are central to recreation on the upper decks of ships, vibrant designs that match the ship’s theming have become increasingly popular.

Beyond the focus on great looking pool decks, it’s essential that these areas are designed with safety and cleanability in mind. Certain elements can provide visual signals to guests regarding critical elements such as a pool edge, step down, or depth of water. Slip resistance can help maintain guests’ footing in these wet areas especially when paired with motion at sea. Surfaces that resist the growth of harmful bacteria help to protect the health of guests, especially since ships are heavily occupied with little downtime between voyages. 

By keeping these elements in mind, the upper decks of cruise ships provide the ultimate zones for aquatic relaxation and fun for their guests as they voyage across the seas. 

SPLASH PADS

Splash pads have become a popular amenity onboard cruise ships for families with young children or guests looking for aquatic play outside a pool setting.

Splash pads provide a variety of play options from dump buckets to water spray features. Generally, free play is more widely available on splash pads due to play requiring a level of imagination and creativity. Encouraging free play by having a highly themed splash pad can help guests who may not know one another play with a similar theme in mind. For example, a pirate themed splash pad can lend a story arc option to guests and create memories that may not have otherwise happened. 

Including all aspects of a splash pad’s construction in theming allows for greater customization and control of the greater cruise experience. From water jets to surfacing, utilizing all the aspects of splash pad design can curate experiences for guests.

Image Credit: eatsleepcruise.com

KIDS’ PLAY AREAS

Kids’ play areas are perfect for onboard daycares and family zones. Both indoor and outdoor dry play areas on cruise ships often feature various playground equipment that require a fall attenuating, cushioned surface to protect against accidental falls when equipment is elevated. An IMO-certified surface like Life Floor has been popular in these applications. 

View fullsize

Fun, vibrant flooring designs can help brighten up a play area by incorporating colors and themes that complement the rest of the space. Inlaid designs can provide another layer of play engagement with surface games or scavenger hunts. Life Floor’s custom cutting capabilities can also reinforce branding with cruise line logos or iconography. 

See our standard Inlay Library here.

PRIVATE ISLANDS

Beyond all of the fun on board, cruise lines that stop at their own private islands allow for all-inclusive theming in a secluded locale. Building an island environment is incredibly complex and requires a wide scope of considerations which centers around guest experience and enjoyment. Aquatic amenities are often the main features on private islands as guests seek to cool off and enjoy warm weather.

Life Floor is featured at two splash pads that can be enjoyed whenever passengers spend a Perfect Day® at CocoCay® courtesy of Royal Caribbean. Guests can cool off, run and play, or relax on the sidelines at both Splashaway Bay designed by Martin Aquatic Design & Engineering or at Captain Jill’s Galleon designed by the Life Floor Studio. These two projects at CocoCay are quintessential examples of Life Floor’s ability to match any aquatic feature’s theming and support risk reduction. 

The graphic elements of these two installations extend the scope of theming to provide immersive engagement for guests.  At Splashaway Bay, the designs on the slide tower panels were integrated into the surface design. Similarly, Captain Jill’s Galleon features a massive vessel with the surfacing surrounding it designed to mimic a body of water. 

Guest experience at an island vista requires comprehensive planning and safety parameters to ensure a low-risk environment while providing ample options for adrenaline-pumping adventures mixed with relaxing opportunities. To minimize interruptions to play, reducing overall risk is critical. One way to reduce risk in aquatic features specifically is to invest in safety surfacing that has increased slip-resistance and cushioning to better protect guests. 

---

Life Floor’s IMO Certified safety surfacing is both lightweight and durable for all types of wet or dry amenities.

We have so much fun working on these projects and serving the unique needs of our cruise partners such as Royal Caribbean, Carnival Cruise Lines, MSC, and Norwegian Cruise Lines among others. To specify Life Floor for your cruise ship, please contact Lindsay Fetzer here.

BEHIND THE SCENES INSTALLATION AT NORTH POINT TRAILS COMMUNITY

Credit: Pembina Valley Online

The North Point Trails Community in Winkler, Manitoba, Canada was established in 2020 through Triple E Developments. Within this community, North Point Park hosts a beautiful playground as well as a splash pad featuring Life Floor safety surfacing in vibrant colors. When choosing a flooring option for the aquatic feature, safety was a priority for the city and the upcoming community. 

Installation of this splash pad was completed by Prairie Surfaces in October 2020 and overseen by our Installation Specialist, Matt Thelen. Their team battled fierce weather conditions including strong, steady winds and rain clouds threatening overhead for days.

Thelen recounts the experience, “[We] pretty much have to have someone beside you holding one tile at a time so it doesn’t blow away. All gluing done in the trailers. [We] parked a semi trailer onsite to help block the wind. The boxes move with us to create a dust/wind barrier as well.”

Despite these environmental challenges, the Prairie Surfaces team installed this beautiful splash pad with top professionalism and care for detail.

“[Life Floor] provides parents peace of mind knowing their children can play safely on the surface.”

— Angela Elias, Executive Assistant, Triple E Developments

Credit: Pembina Valley Online

““It’s easy to move around, it looks great. There’s a washroom building tied in, so you can get changed right at the park. Nearby there’s a gazebo, and a play structure, so it’s just overall a great green space.”

— Jordan Driedger, Winkler's Director of Community Services

This splash pad in Winkler, MB is one of the first facilities in Canada to have a certified splash pad safety surface. The NSF/ANSI/CAN 50:26 standard, which sets forth product requirements for aquatic recreation safety surfacing, was recently expanded to include Canadian territories.  Manitoba’s code does not currently reference NSF 50 Standards, but neighboring territory Saskatchewan has a comprehensive reference within the territory’s code for aquatic facilities. 

Thank you to our partners in Canada, Polyvalens and Prairie Surfaces, for collaborating with us on this project, to Playquest Recreation for recommending us for this project, and to Triple E Developments for including us on this project. 

Do you have a project in mind located in Canada? Connect with Paul-Émile at Polyvalens to receive more information and receive a quote today.

Safety Drives Fun at Handy Park Splash Pad

In 2020, we co-hosted our first ever Make a SPLASH! Contest with Inside Edge Safety Surfaces to award grants to municipalities in the U.S. for upgrading their splash pad surfaces. We initiated this contest to be able to uplift communities across the country with beautiful splash pad surfacing designs that add increased safety for residents. Redford Township, Michigan was one of our winners, earning our 3rd place prize, a 25% grant towards tiles and installation. 

“Redford Township’s splash pad is coming up on our 15th year of operation and continues to remain one of the most popular spring and summer destinations here in our community… This destination is free and open to the public regardless of what community they live in. Many of our families and surrounding community are low to moderate income so this provides an affordable fun option for summertime fun. Back when the project was completed, options for flooring for our system, budget and for sustainability was the brushed concrete. Over time and the high volume of usage, the concrete surfacing has worn down and has become very slippery over the past couple of years. We have tried several options through local contractors to find a solution, but unfortunately we made the decision to close the splash pad at the end of the 2019 season in order to find a safe, cost effective, long term solution. Since this time, we have been looking at options to re-open this popular summertime activity and maintain a safe flooring which is essential. Due to COVID this past year, Recreation Departments have been hit hard and unfortunately we had to put the project on hold. If Redford Township won the Make A Splash Contest this would help restore this amenity for the residents of not only our community but those around us and enable us to operate for many more years to come.”

— Theresa Burgess, Redford Township Leisure Services Director

Before: Painted Concrete

After: Life Floor

The safety issues Redford Township experienced with their surfacing at Handy Park really resonated with our team. We know how important splash pads can be to provide accessible water play to communities across the country so we were happy to award this municipality a prize to make their surfacing safer. Our Studio Team designed a High Tide Theme in a 401 Pattern for the 2000 sq ft installation to brighten up the splash pad while providing a budget-friendly option along with the 25% grant. 

This automobile-themed splash pad showcases a unique car wash spray feature to inspire kids to use their imagination as they drive through the jets and sprays. With a variety of elements from very small jets to larger dumping devices, there are water play activities available to engage guests of all ages, abilities, and comfort levels.

When Kelsi Goss, our Vice President of Design, visited the splash pad one weekend this summer, she remarked at how many community members and families were enjoying this feature together.

“It was great to see such a wide age range of kids having fun in the water and how many families chose to set up picnics and tents adjacent to the splash pad at Handy Park. I watched a few kids take a tumble but they bounced right up again to resume playing. This wouldn’t have been the case if they had fallen on concrete.”

— Kelsi Goss, Life Floor Vice President of Design

Having Life Floor on the surface enables a variety of activities and types of risky play. Babies can crawl across the soft surface and begin to explore water play with smaller jets. Children can be found sprinting around the splash pad playing tag, hiding under the water umbrella, “driving” through the car wash, and even doing cartwheels. We’re happy to have helped improve this community feature so residents can fully enjoy all this splash pad has to offer! 

---

Thank you to Inside Edge Safety Surfaces for installing Life Floor at Handy Park Splash Pad and for partnering with us in the contest.

Methods to Reduce Surfacing-Related Drowning Risks

“All over the world, infants and toddlers drown more frequently than people at any other age. In this age group drowning is the leading cause of death, followed by accidents in and around the home and road traffic accidents. Inadequate supervision, an inability to swim, and lack of barriers separating toddlers from pools and other water are the main causes of drownings of small children… The vast majority of drownings occur in open water: the sea, lakes, ponds, rivers. However, drownings occur in all water including swimming pools and bathtubs. Small children have been known to drown in just a few inches of water - in buckets and ditches for example.”

— Santa Maria Law, Davie, FL

The most common causes of drowning include a lack of swimming ability, a lack of barriers, a lack of close supervision, failure to wear life jackets, alcohol use, and seizure disorders according to the CDC. Less common risks can still be prevented by paying closer attention to potential hazards at the surface level. Safety standards and recommended best practices should be followed wherever possible to further reduce potential for injury and drowning incidents at both pools and splash pads.

Pools

Swimming pools are generally associated with having a high risk of drowning due to significant standing water. In addition to standard safety measures like encouraging swim lessons, posting lifeguards, and having guests keep an eye on the members of their groups, there are some additional ways that facilities can reduce risk associated with injuries that may lead to drowning accidents.

Edge Pads and Lily Pad Walk Landings

Edge pads and lily pad walk landings are the aquatic counterparts to dry playground landings present at either end of zip lines, monkey bars, and other crossing-related activities. Having a cushioned surface at either end of a lily pad crossing or similar activity allows for a safer landing. These protected landings can help reduce injuries associated with missteps if the individual were to come into contact with the pool edge. If the pool edge is not cushioned in these applications, concussive injuries can result from missed footholds and lead to drowning accidents if unseen by facility staff or a member of the individual’s group.

Landing Pads

Water slide exits are an important part of a facility’s operation. Ensuring that there are landing pads at the bottom of slides enables people at the bottom of slide run-outs to enter the pool and exit more safely. Unsafe slide run-outs, especially ones that are submerged and lead into the rest of a pool, can result in trip-and-fall accidents or missed landings which propel guests into the pool. Exiting a slide at a higher than usual velocity can result in collisions with other guests, submersion, and impact-related injuries such as stubbed toes, scraped legs, and cut feet on pool bottoms. Using landing pads in these locations can help prevent many of these incidents.

Drains and Filters

Drains and filters often go unnoticed until they cause issues or injuries. Grating that is too wide can entrap fingers and toes and result in injuries in close proximity to the pool edge. To learn more about recommended best practices, reference this Whitepaper by Daldorado to help you mitigate risk at your facility related to drains. Filtration and drainage systems that do not have proper covers are also hazardous and can introduce risk into the environment by allowing access to guests that should not have access to per the ANSI/APSP-16-2009 and soon the ANSI/APSP-16 2017 performance standards. Making sure that these covers are code-compliant is essential in ensuring that guests are not at risk for entrapment injury or drowning. 

Edge Surfacing 

Many drownings are a result of unintended submersion in water, especially when paired with an inability to swim. For this reason, the treatment of surfaces along the edge of pools should be considered to ensure that guests don’t accidentally slip and fall into the water. Replacing slippery ceramic tile or stone with a textured surface that has enough traction to provide steady footing could help reduce this risk. Zero-depth-entries can similarly benefit from this treatment.  

Splash Pads

Many facilities have chosen to replace public pools with splash pads to provide aquatic recreation while drastically reducing drowning risks. While incidents are much lower with little to no pooling water, some potential still exists, especially with more limited supervision. Drowning awareness is common in places that have been historically associated with related risk such as pools or other large bodies of water. While large bodies of water are the most common places where drowning is likely to occur, “most drownings happen in environments and during activities unsupervised by lifeguards,” according to the International Life Saving Federation.

Splash pads in the U.S. do not typically have lifeguards present due to water not surpassing a few inches in depth at most. It should be noted that drowning risk is still a factor wherever water is present, especially for young children. 

Proper Supervision 

Imagine a warm summer day at a splash pad with several families with young children playing in the water features. Parents and caretakers may be socializing, relaxing nearby, and checking in with their children periodically. In an instant, two children could collide or a child could slip on slippery concrete, stone, or tile and knock themselves out on that same hard surface. If that unconscious child was too close to a water feature or pooling puddle, they would be at increased drowning risk if their guardian was not paying attention. 

In order to help prevent situations like this from occurring, there are some ways to be more vigilant about safety. Caretakers should consistently watch their children and avoid distractions. Facility operators can take steps toward mitigating risk at splash pads by ensuring drains are working properly and by investing in safety surfacing that reduces risk of slip and fall injuries by having slip-resistant and cushioned properties.

Safety Surfacing 

Safety surfacing is a good feature to include on a splash pad, pool deck, or any other aquatic facility to mitigate facility risk, especially when choosing a safety surface tested and certified by an independent third party organization. Slip-resistance helps prevent slip and fall accidents, cushioning helps protect falls if they occur, and having an impermeable and cleanable surface means that microbial growth is not supported and the surface is easier to maintain and keep hygienic. Cushioned safety surfacing also helps protect children when collisions happen during play and can help prevent risks associated with becoming unconscious or falling into a nearby body of water.

Conclusion

It’s important to be aware of drowning risks in aquatics and to ensure that your facility is taking steps to mitigate risk wherever possible. Choosing safer options at the surface level and re-evaluating more traditional materials like concrete and tile can help to reduce risk of injuries.

In order to help mitigate risks associated with drowning and near-drowning accidents, we recommend that your staff evaluates your facility from a guest’s perspective. Slide down slides, cross lily pad landings, and engage with the facility as they would. Take notice of what is uncomfortable, pay attention to areas that commonly experience incident reports, and take steps to remediate those issues.

“According to the National Electronic Injury Surveillance System database, in 2014 alone, estimated 20,000 injuries occurred on pool decks, splash pads or water parks, resulting in emergency room visits. The common denominator in all these splash pad injuries is the surfacing. From personal research that I conducted after visiting this particular splash pad, the most common splash pad surface is concrete, often treated with an abrasive coating. With the leading cause of admission to Monroe Carell Jr. Children’s Hospital at Vanderbilt being unintentional pediatric falls, this type of flooring is concerning.”

— Emily Riley, a former injury prevention program manager for Be in the Zone at Monroe Carell Jr. Children’s Hospital

SETTING A SAFER PRECEDENT FOR CANADA: YMCA OF GREATER MONCTON

Recently, NSF International expanded Standard 50 to extend across Canada, which includes recommendations for surfacing in aquatic play areas under NSF/ANSI/CAN 50:26 (formerly NSF/ANSI 50:26).

With its recent Life Floor installation, the YMCA of Greater Moncton, NB is one of the first aquatic facilities in Canada to recognize the importance of having NSF/ANSI/CAN 50:26 certified safety surfacing. The facility is a combination of an indoor splash pad with a zero-depth entry and a playground. Because of this unique configuration, the staff sought out a product that was able to transition seamlessly from wet to dry applications while maintaining their commitment to safety. To accomplish this, they selected Life Floor to be installed.

“Having seen Life Floor at a major trade show, we knew it was the product we wanted to install in our new facility.”

— Scott Munro, Vice President of Facilities

A custom beach-inspired design was chosen to complement the existing tropical theming. Life Floor’s foam-rubber tiles were able to create the perfect transition the YMCA needed between the wet and dry play areas, especially since splash pads are essentially wet playgrounds. The cushioned and impact-absorbing surfacing allows children to run, jump, and play without limits - never needing to stop and put on shoes or change the way they play from one area to the next. As a result, the fully immersive experience enhances imaginative play. 

The YMCA of Greater Moncton is skipping ahead of their competition by creating a facility full of imagination, play, and fun. They have created a holistic experience to provide their members with the perfect beach day right in their community’s backyard.

We thank the YMCA of Greater Moncton for their commitment to safety and for being one of the first in Canada to adopt NSF/ANSI/CAN 50:26 safety surfacing standards for the benefit of their members. We look forward to the future as more Canadian facilities follow their example and recognize the importance of this safety standard as an integral part of their business.

---

To learn more about the official code in your region or state, check out this free resource.

---

If you’d like to specify or install NSF/ANSI/CAN 50:26 surfacing for an aquatic play area in Canada, please contact our Canadian Partner, Paul-Émile Beaudry at pebeaudry@polyvalens.ca to assist you in both English and French.

For U.S. clients and all other inquiries, please contact us directly via our online contact form or send us an email at solutions@lifefloor.com. 

French Translation

Le YMCA du Grand Moncton, NB crée un précédent sécuritaire en milieu aquatique au Canada.

Récemment, NSF International a étendu la norme Standard 50 partout au Canada, incluant des recommandations pour les surfaces de jeu aquatiques sous l’appellation NSF/ANSI/CAN 50,26 (précédemment nommée NSF/ANSI 50:26).

Avec ses récentes installations de Life Floor, le YMCA du Grand Moncton, NB est l’un des premiers centres d’installation aquatique à reconnaître l’importance d’avoir une surface sécuritaire certifiée NSF/ANSI/CAN 50:26. En effet, l’établissement se compose d’un mix de  deux (2) aires de jeux, l’une étant une surface mouillée (indoor splash pad) plane et l’autre étant une aire de jeux sèche. À cause de cette configuration spéciale, les employés ont recherché un produit qui permettrait la transition en toute transparence, de la surface mouillée à la surface sèche pour leurs activités tout en gardant un engagement de sécurité irréprochable. Un seul choix leur permettait de tout rallier : Life Floor.

Après avoir vu Life Floor lors d'un grand salon, nous avons sû que c’était le produit que nous voulions pour nos installations !  —Scott Munro, Vice Président du YMCA du Grand Moncton, NB

Au niveau du design,  le thème tropical dans l’aire de jeu d’eau et le thème plage dans l’aire de jeu sèche sont en parfaite harmonie pour s’adapter au thème pré-existant. Et maintenant, les enfants peuvent donc courir, sauter, culbuter et jouer sans limites sur une surface conforme aux nouveaux standards. Les surfaces coussinées  et absorbant tout impact permettent aux enfants de jouer sans s’arrêter pour mettre leurs chaussures ou changer leur façon de jouer d’un endroit à l’autre. Comme résultat, l’expérience devient totalement immersive et renforce leur jeu imaginatif.

Le YMCA du Grand Moncton devient donc un chef de file en adoptant des installations pleines d’imagination, de jeu et de plaisir ! Ils ont créé une expérience holistique en offrant à leurs membres une journée de plage parfaite en plein dans leur cour !

Nous remercions le YMCA du Grand Moncton de leur engagement pour la sécurité de leurs membres et d’être les premiers au Canada à appliquer la norme NSF/ANSI/CAN 50.26. Nous espérons que plusieurs autres organismes, centres aquatiques  et municipalités suivront l’exemple du YMCA et reconnaîtront l’importance de l’application de cette recommandation comme faisant partie de leur politique d’opération .

Si vous désirez de plus amples informations sur les tuiles Life Floor, communiquez avec Polyvalens Inc, notre distributeur au Canada.

Promoting Play at Fun Spot America

Fun Spot is a vibrant family-owned theme park with a beautiful splash pad located in the heart of Orlando, FL. Just over one year ago, Fun Spot decided to expand on their mission of “Safe-Clean-Fun” and showcase their logo on a larger-than-life scale on the splash pad. Martin Aquatic Design and Engineering created a bright tile layout inspired by the logo colors and recommended Life Floor for the project. With Life Floor’s custom cutting capabilities, we were able to create a stunning representation that contributes to guest safety and overall experience. 

“We’ve had the floor for about a year now and we’re very happy with it. It’s held up very well. The logo, our company logo on the ground looked superb and still does. The installation on it was flawless. I mean they came in, they were in and out in like two days. And I mean that there’s absolutely no complaint on my end. We’re very happy with it, we’d suggest it to others. We think the product is very well built, it’s good materials. The kids love it, and now they’re playing on it. Yeah, there’s absolutely nothing I would say negative about the floor.”

— John Arie Jr, Fun Spot CEO

Safety and ease-of-maintenance were also important factors for Fun Spot’s choice of safety surfacing. Algae build-up and the issues associated with concrete are well known in the aquatics industry, so the staff at Fun Spot was thrilled to experience the easier maintenance Life Floor provided due to the product’s cleanable features since the tile does not support microbial growth in accordance with NSF/ANSI Standard 50 testing criteria.

“I would say to everybody in our industry that it’s a very well built floor. It’s safe for your guests. It’s very low maintenance. The appearance of it looks amazing. And I would definitely recommend anybody that has a splash pad or even water features in their park to use Life Floor. It’s been a great experience. The installation went very well just as it was described - there were no surprises and we’re very happy with the floor.”

— John Arie Jr, Fun Spot CEO

We are so thankful for the opportunity to increase safety and fun that will contribute to the lasting, positive memories that families make at Fun Spot America.

5 Reasons Why Aquatic Facilities Choose Life Floor’s Predefined Themes and Patterns

While Life Floor can be used to create virtually any pattern or design on a flooring surface, we’ve created a catalog of Themes and Patterns as a starting point for customers looking for design inspiration. These options can match or complement a facility’s overall look while also providing the standard benefits that come with any Life Floor installation. Pairing the safety, comfort, and durability of our tiles with these aesthetically interesting designs has added play value and theming to aquatic facilities across the country and around the world. Here are some of the top reasons why customers have chosen to explore our Themes or Patterns for their projects!    

Multi-Color Designs

All of our Themes, or color palettes, are designed with three or more colors to optimize how Life Floor installations look over time. Our reason for favoring a multi-colored design approach is that monochromatic surfaces, much like single-color carpets, show regular wear or debris much more quickly. Since many of our projects are located outdoors where it’s not uncommon for occasional leaves, twigs, dirt, or grass to make their way onto splash pads, we’ve found that breaking up the field of color makes these surfaces look best for an extended period of time. As an added benefit, installations that use Life Floor Themes often enliven and complement surrounding parks and aquatic spaces with a visually interesting palette and design.

High Tide Theme and 301 Pattern at Synderville Basin Rec Center - Park City, UT

Considerable Cost Savings 

Our Themes showcase combinations of some of our most popular colors. Customers looking to add safety and design often opt to use these color families as starting points for their designs. 

High Tide: Ocean, Bluebird, Aviator [Note: Updated in 2021. See Update Here]

Montauk: Mojave, Gobi, Sandstone

Boulder: Boulevard, River Rock, Foghorn

Since Life Floor is manufactured as standard 24”x24” tiles, our Square Patterns (301, 401, 501) offer the greatest cost savings by maximizing the full use of the material. Installation time is lowest for these options as well. Our Triangle (302, 402, 502) and Rectangle (305, 405, 505) Patterns offer a combination of full and half tiles, providing an efficient use of material that minimizes waste. Installation time is slightly longer since these Patterns are a bit more complex; however, many of our budget-conscious customers still opt for these designs given the added visual interest they provide. 

Square Pattern (401)

Triangle Pattern (302)

Rectangle Pattern (505)

Overall, we’ve found that when municipalities are interested in adding a safety solution to their aquatic facilities or want to upgrade to meet the NSF/ANSI 50 standard for aquatic surfacing, they most commonly opt for the Theme and Pattern options described above. These designs provide all of the benefits of Life Floor at the best prices. 

Reduced Time to Receive a Quote 

Because our Themes and Patterns are pre-established, creating a rendering that fits within the boundaries of a specific project area is a fairly quick process. When compared to the time required to create fully custom designs, this approach fast-tracks the quoting process for customers looking to receive budgetary numbers in a shorter amount of time.

301 Pattern in tan tones (similar to Montauk Theme) at Shoreview Community Center - Shoreview, MN

Design Options that Eliminate the Guesswork 

For customers looking for a basic surfacing solution or who don’t have a specific design in mind, our pre-set Themes and Patterns have been created based on established best practices and provide a variety of looks to accommodate a range of facilities. These designs feature sets of colors that are proven to work well together and layouts that have been historically favored by our customers over time. Having the ability to pick and choose from this catalog of options eliminates most guesswork for many of our customers, especially those that are primarily focused on providing a safety solution at their facilities. 

Boulder Theme in rectangles at Pleasant Glade Pool & Locker Rooms - Grapevine, TX

An Affordable Starting Point for Custom Options

Many of our customers have asked for designs that begin with a Theme and/or Pattern, but are modified in some way to better suit their specific facility’s needs. For instance, some might swap out a color or two from a Theme to shift the color palette in a slightly different direction. Others might choose a preset Pattern, but pair it with a completely custom color palette. Some customers have opted to add inlays, like the ones shown below, to contribute to the play value and theming of their facilities. We’ve also found that some people go with an affordable Theme and Pattern to better balance the cost of a project that requires the addition of a specialty logo or play feature in the surface design. Anything can be customized as needed and our Themes and Patterns serve as a perfect starting point for the conversation! 

High Tide Theme and 302 Pattern with fish inlays at Cootamundra Splash Park - Cootamundra, Australia

---

Interested in specifying Life Floor on your next project? Check out our standard Themes and Patterns and reach out to us if you’d like to explore a custom design or to get started on your project. Our design services are complementary right now, so we’re happy to help meet the needs of your facility however we can. Thank you for considering Life Floor!