We hope you had a safe and successful summer season! As you winterize your outdoor splash pads and pool decks, take advantage of the checklist below to reflect on how your facility performed during the season and make plans to fix any issues that arise.
FILTERS
Be sure to flush the system and clean out the filters one last time before winterization is complete. This helps ensure no debris clogs the system and leaves less chance for microbial growth during fall and spring months before frost sets in. Annual preventative maintenance is critical to catch any issues before they turn into more serious problems.
SPRAY FEATURES AND POOLS
Check all moving pieces for worn parts and fix them or order replacements ahead of time to ensure a smooth reopening process. Also be sure to remove and clean all nozzles and spray heads to remove any build-up. Drain all the feature lines and pool bodies so water does not sit in pipes during the winter; this could cause bursting and additional damage.
Each equipment manufacturer has specific instructions for how to winterize your facility’s spray features. We recommend that you follow them closely to ensure no damage is caused by low temperature variations. Always check to be sure your main water and electrical supplies are turned off.
SURFACING
Some of the top reasons for injuries at aquatic facilities are directly related to surfacing. Review your injury reports and categorize based on type. For example, we would recommend segmenting based on the following top categories:
Slip-and-Falls
These types of injuries are a direct result of having a slippery surface. Common injuries that are caused by this type include bruising, skinned joints, concussions, broken limbs, and abrasions in general caused by a rough or hard surface.
Burns from surface or grating
These types of injuries result from having a surface in full sun during operation. Metal grates and filtration systems can heat up to dangerous temperatures and cause blistering and burn wounds. Concrete can also reach scalding temperatures especially in apron areas surrounding spray features so be aware of burn-related injuries when reviewing your injury reports.
Impact Injuries from Slides
These types of injuries are typically centralized in the feet since most guests will go down slides feet first. Examples include stubbed or broken toes, foot abrasions, and sprained ankles. If guests slide down head first, concussions are not uncommon and drowning incidents may occur. Installing slide landing pads at slide bottoms can help reduce or virtually eliminate the number of injuries related to slide exits by increasing impact absorption and decreasing exit speed with a slip-resistant surface.
Contamination
These types of injuries are related to water-borne pathogens or contaminants that lead to illnesses. Cryptosporidium (commonly known as Crypto) is a major concern for aquatic facilities and taking necessary precautions when cleaning surfaces is critical. The Model Aquatic Health Code is a good reference.
Once you’ve identified the top injury categories at your facility, you can begin to address your top pain points. Many of these injuries can be lessened or prevented by choosing an independent, third-party tested safety surface from NSF/ANSI/CAN 50.
DESIGN
While design can be more subjective, be sure to consider your guest experience from an overarching standpoint both physically and visually.
Physically, how do guests from a wide range of abilities and ages interact with your facility? Are sinks in restrooms placed at a height accessible to people riding wheelchairs or Little People? Does your facility have ADA approved ramps integrated all the way from the parking lot to the features?
Visually, consider the current theme and appearance of your facility in all interactive areas. Ensure there are no broken or missing elements, and critically evaluate the experience guests will have at the location. Additionally, consider new opportunities to enhance theming or different types of play. Depending on your target market and average age of guests, add patterns or imagery to your pool deck or splash pad surface to engage and encourage play. If budget allows, add new aquatic features that expand play options to a wider range of different ages and abilities. Find opportunities to increase play value and encourage risky play.
For more information on retrofitting your facility with Life Floor or specifying Life Floor on a new build, please contact us here or send us an email at solutions@lifefloor.com.
Looking to budget Life Floor into the cost of your project? Reach out to our team to request our Budget Guide or a complimentary quote.
Please Note: This article is intended to supplement winterization procedures, but should not be considered a comprehensive guide. For complete instructions, please refer to your operation manuals provided by product manufacturers.